Home AboutUs Products services news&events Dealers Education contactus
STATE OF ART INSTRUMENTATION FROM AN INNOVATIVE COMPANY
MINIM BIN WITH POWER SUPPLY UNIT - [ Type : MB 404 ]
(with 42 pin NIM Connectors)
 
Technical Data

MINIM BIN & POWER SUPPLY UNIT Type : MB404 manufactured by NUCLEONIX is primarily designed with the objective of conserving bench space and to achieve significant saving in cost of the Minimbin based Nuclear Counting Systems. Minimbin systems have the advantage of modularity in the system integration. This results into flexibility in interchangeability of functional modules. A small control panel not occupying any of the available module space is located at the right side of the bin, providing control switches, test points and indicator lamps.

Features

  • Compact, rugged, light weight and portable.
  • Significant saving in cost and conserves bench space.
  • Provides space for EIGHT single width NIM modules, as per AEC specifications.
  • Power supply provides +/-12V @1.5A and +/-24V @0.75A and 115V AC @0.25A
Specifications
MINIMBIN
INTERCHANGELABILITY
Mechanical Tolerance are in accordance with TID 20893 (Rev) enable interchangeability of all NIM standard modules .
PANEL DIMENSIONS
Standard rack 8 ¾ inches high and 8 single bits wide excluding, control panel.
DEPTH BEHIND PANEL
Approximately 10.9 inches
BIN CONNECTORS

8 NIM standard connectors (42 pin as per AEC specifications) at the panel as specified by Nucleonix, wired in parallel for standard voltages.

INSTALLED WIRING
All the EIGHT connectors are wired for +12V,-12V,+24V and -24V and high quality GND in accordance with TID 20893.
CONSTRUCTION
Bin is constructed with two side aluminium with casted handles, top and bottom grilled steel rod mesh with two side channel supports, module guides and a connector plate at the back and a two bit space reserved for power supply module.
MECHANICAL DIMENSIONS
11.75" width x 11.00 depth upto connector plate x 8.75" height.
Power Supply unit
POWER SUPPLY UNIT
This is a compact enclosure seated at the rear side of the bin which generates and provides DC supplies to all the bussed power connectors of the bin.
INPUT Voltage

230V AC, 50 Hz, +/-10% variation allowed

DC OUTPUT

+12V DC @1.5A, -12V @1.5A, +24V DC @0.75A, -24V @0.75A. 70watts maximum output.

REGULATION
Better than +/-0.1%
NOISE AND RIPPLE(rms)

Less than 10mV for all supplies as observed at the power supply mating connector level.

VOLTAGE ADJUSTMENTS
+/- 5% minimum range
CIRCUIT PROTECTION
Input AC lines fused. Output is protected against short circuit and power supply recovers fully on removing the short circuit.
Plot No.162 A & B, Phase-II, IDA, Cherlapally, Hyderabad-500051 India Phone:+91-40-27263701,27262146,040-68888777, Fax : 040 - 27262146
Copyrights (c) 2016, Nucleonix Systems, All rights reserved.