Home AboutUs Products services news&events Dealers Awards contactus
STATE OF ART INSTRUMENTATION FROM AN INNOVATIVE COMPANY
NaI SCINTILLATION DETECTOR (Size 2”x2” Well Type)- [ Type : SD 152W ]  
Technical Data

NUCLEONIX Scintillation Detector (2”x2” - Well Type) SD152W is designed to be used with Gamma Ray Spectrometer GR611M (Modular) or Integral model GR612 or its equivalent unit.

The integral assembly consists of NaI (Tl) crystal size 2”x2”, integrally coupled to a 2 inch bialkali phototube with mu-metal magnetic / light shield. The crystal and the photomultiplier tube are housed in an aluminium container.

The assembly is connected to a solid state Pre-amplifier PA311 of NUCLEONIX make. Connectors are provided on Pre-amplifier for EHT, low voltage and signal output. The complete Scintillation Detector can be housed in a Lead Shield. The pre-amplifier is designed to suit a wide range of standard Scintillation detectors. Well type detectors are recommended for Radiochemistry works.

Features

  • 2x2 NaI Integral assembly.
  • Resolution for Cs-137 better than 9%.
  • Operating Voltage 700V to 900V.
  • Recommended for use with NUCLEONIX make Gammaray Spectrometers.
  • 2 Bialkali Phototube with mu metal magnetic / light shielding.

NaI SCINTILLATION DETECTOR WELL TYPE  2X2
Specifications
Transducer
Well type Integral assembly
Phospher
NaI (Tl), 2x2 inches crystal
Photomultiplier
2” Bialkali phototube with mu metal magnetic/light shielding.
Well Size
0.656" dia x 1.546" deep
Operating Voltage
700 - 900V
Resolution
Better than 9% with Cs-137
Pre-amplifier
Built-in
Gain (Approx)
25
Noise
(rms referred to input) Less than 50 micro volts
Output
Positive tail pulse
Output Impedance
90 Ohms
Power Requirement : (Typical)
-12V @12mA
Plot No.162 A & B, Phase-II, IDA, Cherlapally, Hyderabad-500051 India Phone:+91-40-27263701,27262146,040-68888777, Fax : 040 - 27262146
Copyrights (c) 2016, Nucleonix Systems, All rights reserved.