STATE OF ART INSTRUMENTATION FROM AN INNOVATIVE COMPANY
NaI SCINTILLATION DETECTOR(Size 3 ”x3” Well Type)-[ Type : SD 153W ]
NUCLEONIX Scintillation Detector (3”x3” - Well Type) SD153W is designed to be used with Gammaray Spectrometer GR611M (Modular) or its equivalent unit.The integral assembly consists of NaI (Tl) crystal size 3”x3”, integrally coupled to a 3 inch bialkali phototube with mu-metal magnetic / light shield. The crystal and the photomultiplier tube are housed in an aluminium container.
The assembly is connected to a solid state Pre-amplifier PA311 of NUCLEONIX make. Connectors are provided on Pre-amplifier for EHT, low voltage and signal output. The complete Scintillation Detector can be housed in a Lead Shield. The pre-amplifier is designed to suit a wide range of standard Scintillation detectors. Well type detectors are recommended for Radiochemistry works.
3”x3” NaI Integral assembly.
Resolution for Cs-137 better than 9%.
Operating Voltage 750V to 900V.
Recommended for use with NUCLEONIX make Gamma ray Spectrometers.
3” Bialkali Phototube with mu metal magnetic / light shielding.
Well type Integral assembly
NaI (Tl), 3x3 inches crystal
3” Bialkali phototube with mu metal magnetic/light shielding.
0.656" dia x 1.546" deep
750 - 900V
Better than 9% with Cs-137
(rms referred to input) Less than 50 micro volts
Positive tail pulse
Power Requirement : (Typical)
Plot No.162 A & B, Phase-II, IDA, Cherlapally, Hyderabad-500051 India Phone:+91-40-27263701,27262146,040-68888777, Fax : 040 - 27262146
Copyrights (c) 2016, Nucleonix Systems, All rights reserved.