A. SAMPLE ANALYSIS SERVICES FOR RADIO ACTIVE CONTAMINATION MEASUREMENT:
Radioactive Contamination (RaC) in Metal industries, especially in steel industries has become a serious issue these days. Many of the exporting steel industries have approached us for sample analysis, to obtain report in Bq/g. In view of this Nucleonix System, has decided to offer Radioactive Contamination Analysis Services from its Radio-analytical lab. Details of the sample requirement by weight, by dimensions and terms and conditions are given in the following paragraphs / points.
a. Sample sent for analysis, net weight should not be less than 1.0kg and not more than 1.5kg. Send the sample in small pieces, each weighting approx 100 to 150 grams, totalling upto 1kg (approx). Do not send single piece of weighting 1kg.
b. The entire mass sent for analysis shall be of the same heat. Heat number is to be specified. Mixed heat samples can not be analyzed as this will give rise to wrong results.
c. If your components are very small in size then you can send multiple components with total weight being within the range as specified above.
d. Largest dimension of the sample in any directions should be not more than 1 ".
e. Analysis will be done using Radioactive contamination analyser (Bq/g measurement system) NaI scintillation detector based multi channel analyzer system with detector being covered with adequate lead shielding. Report will be issued by our Radio analytical lab.
f. Scanned copy of the reports will be signed by the Radiation Safety Officer (RSO) of our company.
g. Sample sent for analysis can not be returned back.
B. RaC MEASUREMENT SERVICES AT SITE : Nucleonix can offer professional, RaC measurement services at site and issue certification for exporters.