High Voltage Unit [ TYPE : HV 501 ]
Technical Data
NUCLEONIX offers a standard Detector Bias Unit Type HV500 which is a compact STANDARD/NIM Module (TWO bit). This is designed to meet the full HV bias requirement for a broad range of Nuclear radiation detectors like G.M.detectors, ionization chambers, scintillation detectors, photo multiplier tubes, etc,. Apart from this range of applications it also can be used as a high voltage source in areas where high degree of regulation, stability and accuracy are required. Output can be varied by a precision ten turn helipot and output indication is provided on a DPM.
Features
Specifications
| OUTPUT VOLTAGE | 0V to 1500V continuously variable by a ten turn helipot provided on front panel. (All specifications are valid from 10V to 1500V). |
|---|---|
| OUTPUT INDICATION | Provided on a 3 1/2 digit LED, DPM. |
| OUTPUT CONNECTOR | MHV Socket (by default) UHF Socket (if specified) |
| OUTPUT CURRENT | It can deliver upto a maximum of 1mA. |
| OUTPUT POLARITY | The unit is offered with a choice of both POSITIVE or NEGATIVE POLARITY selectable by reversing a polarity connector. (Provided inside). |
| LINE & LOAD REGULATION | Better than 0.05% of full scale. |
| RIPPLE | Less than 20 mV peak to peak. |
| PROTECTIONS | Indefinite protection against overload and short circuit . Under overload the unit doesn’t meet the specifications whereas on removal of short circuit it will recover by itself. |
| POWER REQUIREMENT | Draws power from a standard BIN / NIM Power Supply or MINIBIN power supply. +24V at 250mA’ +12V at 50mA , -12V at 50mA |
| LINEARITY | Better than +/- 0.2% |
| TEMPERATURE STABILITY | Better than 100 PPM. |
| MECHANICAL DIMENSIONS | Standard 2 bit. |
| REAR MODULE CONNECTOR | Amphenol connector Type:26-159-24P-H (24 pin type) or NIM standard connector as per AEC specifications TID 20893 (Rev) Type : AMP 2041865 optional. |
